Avocent Access Router Cyclades-PR2000 User Manual

The second step in most interface configurations is to choose which network protocol to use and assign values
to the relevant parameters.  At least one of IP, Transparent Bridge, or IPX (optional, and discussed in chapter
13) must be activated.  Use the information provided below to set the parameters for each interface.  The
Ethernet network protocol menu includes IP bridging and is explained in chapter 5.  The SWAN Network
Protocol Menu is given in figure 7.1.  Note that this menu varies slightly for each interface.  Specific information
on the options for each interface is provided in the CyROS Reference Guide in the chapter for the interface.

Interface

IP

Transparent
Bridge

Active
Interface Unnumbered/Numbered
Assign IP from Interface
Primary IP address
Subnet Mask
Secondary IP Address
Subnet Mask
IP MTU
NAT
ICMP Port
Incoming Rule List Name
Detailed Incoming IP Accounting
Outgoing Rule List Name
Detailed Outgoing IP Accounting
Routing of Broadcast Messages

Status
Port Priority
Incoming Rule List Name
Outgoing Rule List Name

Network Protocol

SWAN

FIGURE 7.1 NETWORK PROTOCOL MENU TREE FOR THE SWAN INTERFACE