Aviom AV-P2 User Manual
Pro16 Output
Channels 1-16 In
Channels 1-16 Out
Channels 17-32 In
Channels 17-32 Out
A-Net
A-Net Expansion
Audio channels 17-32
Audio channels 1-16
Pro16 Output
Pro16 Input
Pro16 Input
Two Pro16 input modules configured as 32 x 0
Two Pro16 output devices are connected on the receive side of the
audio network. In the diagram, any Pro16 output device can be used.
This includes A-16II and A-16R Personal Mixers, as well as AN-16/o and
AV-P2 output modules.
audio network. In the diagram, any Pro16 output device can be used.
This includes A-16II and A-16R Personal Mixers, as well as AN-16/o and
AV-P2 output modules.
To configure a 32 x 0 system:
Connect the first 16 mic- or line-level audio sources to
inputs 1-16 on the first Pro16 input module.
Connect the second group of 16 audio sources to
inputs 1-16 on the second Pro16 input module.
Connect a Cat-5e cable from the A-N
inputs 1-16 on the first Pro16 input module.
Connect the second group of 16 audio sources to
inputs 1-16 on the second Pro16 input module.
Connect a Cat-5e cable from the A-N
et
o
ut
port on the
first input module to the A-N
et
e
xpANsioN
port on the
second input module.
Connect a cable from the A-N
Connect a cable from the A-N
et
o
ut
port on the second
Pro16 Series input module and run it to the destination
where the Pro16 output modules are located. Plug it
into the A-N
where the Pro16 output modules are located. Plug it
into the A-N
et
i
N
port on the first output module.
Connect a Cat-5e cable from the A-N
et
e
xpANsioN
port
on the first output module to A-N
et
i
N
on the second
output module.
Patch the audio outputs from the two output modules
into the desired destinations.
Patch the audio outputs from the two output modules
into the desired destinations.
Remember that the maximum cable length between A-Net devices is
500 feet (150 meters). Always use Cat-5e UTP cable.
500 feet (150 meters). Always use Cat-5e UTP cable.
The diagram that follows shows a pair of 16-channel Pro16 input
modules used for audio input channels 1-16 and 17-32, connected to a
pair of output modules.
modules used for audio input channels 1-16 and 17-32, connected to a
pair of output modules.
1.
2.
3.
4.
5.
6.
will be connected to an A-Net Out port.
The A-Net Out ports on the Pro16 output modules
should be empty when only four Pro16 Series units are
being used to create a network. These ports are then
available for adding audio splits with additional Pro16
output modules, or for connecting to a Personal Mixer
product such as the A-16II or A-16R.
The cable connecting the two halves of the network
(carrying 32 channels of audio) should be connected
to one A-Net In port and one A-Net Out port.
Do not connect Cat-5e cables carrying expanded
system data (more than 16 channels) to an A-Net
Distributor or Personal Mixer product.
The maximum cable length specification of 500 feet
(150 meters) applies to the length between an A-Net
In port and an A-Net Out port. Cables used to connect
devices via the A-Net Expansion ports must fall within
this maximum distance.
An A-Net Expansion port is never connected to another
A-Net Expansion port.
The A-Net Main Out on the AN-16/i-M Mic Input
Module is the only A-Net port that works with the
Expansion port. The A-Net Aux output carries only
local data.
The A-Net Out ports on the Pro16 output modules
should be empty when only four Pro16 Series units are
being used to create a network. These ports are then
available for adding audio splits with additional Pro16
output modules, or for connecting to a Personal Mixer
product such as the A-16II or A-16R.
The cable connecting the two halves of the network
(carrying 32 channels of audio) should be connected
to one A-Net In port and one A-Net Out port.
Do not connect Cat-5e cables carrying expanded
system data (more than 16 channels) to an A-Net
Distributor or Personal Mixer product.
The maximum cable length specification of 500 feet
(150 meters) applies to the length between an A-Net
In port and an A-Net Out port. Cables used to connect
devices via the A-Net Expansion ports must fall within
this maximum distance.
An A-Net Expansion port is never connected to another
A-Net Expansion port.
The A-Net Main Out on the AN-16/i-M Mic Input
Module is the only A-Net port that works with the
Expansion port. The A-Net Aux output carries only
local data.
32-Channel Examples
In the following examples, any Pro16 input module can be used. This
includes the AV-M8, Y1 console interface card (for Yamaha products),
D-16c console interface card (for DiGiCo products), AN-16/i, or the
AN-16/i-M. Only one device is shown in the illustrations. They are
referred to generically as “Pro16 input modules.”
includes the AV-M8, Y1 console interface card (for Yamaha products),
D-16c console interface card (for DiGiCo products), AN-16/i, or the
AN-16/i-M. Only one device is shown in the illustrations. They are
referred to generically as “Pro16 input modules.”
A pair of AV-M8 units cascaded via the ADAT link are shown in the
diagram as a single input module.
diagram as a single input module.
32 Channels Send by Zero Channels Return
The 32 x 0 configuration has 32 audio inputs on one side of the audio
network and 32 audio outputs on the other side.
network and 32 audio outputs on the other side.
With this configuration, up to 32 analog audio (mic- or line-level) signals
are connected as inputs to two Pro16 input modules. One input module
contains channels 1-16, while the other has channels 17-32.
are connected as inputs to two Pro16 input modules. One input module
contains channels 1-16, while the other has channels 17-32.
•
•
•
•
•
•