Avaya Media Gateway G700 User Manual

●

Power requirements are consistent with the 1152A1 PDU voltage and power ratings. 

Refer to Appendix B in the user’s guide that comes with the unit for voltage and power 
ratings.

1. Connect an Ethernet cable to the telephone using an external splitter or directly (if the 

device is Power over LAN Enabled).

2. Connect the opposite end of the same cable to the RJ45 wall outlet.

3. On the front panel of the 1152A1 PDU, monitor the response of the corresponding port LED.

If it lights up GREEN, the unit has identified your telephone as a Power over LAN telephone.

The 1151B1/C1 and 1151B2/C2 power supplies are local power supplies. The telephones or 
consoles connect directly to them through an RJ45 connector. The 1151B2/C2 has a battery 
backup.

These power supplies comply with the Underwriters Laboratories Inc. (UL) Standard UL 60950 
third edition. 

For safety instructions, see 

on page 371. For installation instructions, see 

on page 372.

Certified

CSA 22.2

Approved

EN6950

Approved

CE