Avaya Media Gateway G700 User Manual

In this section, you will use the SAT interface to:

●

●

●

●

●

CAUTION:

Before continuing, be sure you have saved translations in Communication 
Manager. 

Begin by resetting the system.

1. Access the server’s command line interface using an SSH client, like PuTTY, and an IP 

address of 192.11.13.6.

2. Log in, and open a SAT session (type sat or dsat). 

3. At the SAT prompt, type reset system 4

The system reboots.

4. After the reboot is complete, telnet to the S8300, login, and open a SAT session.

If the S8300 network configuration includes LSPs, they must be specified on the Node Names 
screen.

1. At the S8300 SAT prompt, type change node-names ip to open the Node Names 

screen. 

change node-names ip

Page 1 of 1

                            IP NODE NAMES

Name              IP Address          Name                IP Address

default_________

0__.0__.0__.0__ _______________

___.___.___.___

node-10-lsp

192.168.1 _.50_

_______________    ___.___.___.___

node-11-lsp

192.168.1 _.51_

_______________    ___.___.___.___

__________ 

___.___.___.  _

_______________    ___.___.___.___

__________ 

___.___.___.  _

_______________    ___.___.___.___

__________ 

___.___.___.  _

_______________    ___.___.___.___