Avaya Media Gateway G700 User Manual
Manual upgrade of an existing S8300A and G700 to R3.1
622 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
Upgrading the S8300B Media Server
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Setting telnet parameters
The Microsoft Telnet application may be set to send a carriage return (CR) and line feed (LF)
each time you press Enter. The installation program sees this as two key presses. You need to
correct this before you Telnet to the server.
each time you press Enter. The installation program sees this as two key presses. You need to
correct this before you Telnet to the server.
Note:
Note:
This procedure is done entirely on your laptop, not on the S8300.
To set telnet parameters
1. Click Start > Run to open the Run dialog box.
2. Type telnet and press Enter to open a Microsoft Telnet session.
3. Type unset crlf and press Enter.
4. Type display and press Enter to confirm that Sending only CR is set.
5. Type quit and press Enter to save the setting and close the window.
This procedure resets your Microsoft Telnet defaults and does not need to be done each time
you use Telnet.
you use Telnet.