Avaya Media Gateway G700 User Manual

4. Refer to the VOIP FW column and row for slot V0 (same row occupied by the G700 

information) to see if the number matches the VoIP firmware identified in your planning 
forms. 

If not, you must also upgrade the G700 media gateway motherboard VoIP module.

Note:

The VoIP processor on the motherboard is upgraded using the same firmware 
image file as the VoIP media modules; for example, the file mm760v8.fdl is 
vintage #8. 

5. Check the FW VINTAGE column for vintages of each of the installed media modules: 

MM710, MM711, MM712, MM720, and/or MM760 to see if they match the FW vintages in 
the planning forms. 

If not, you must upgrade them, as well.

!

Important:

The procedures in this section copy firmware files from a TFTP server to the 
G700. The TFTP server can be an S8300 primary controller, a customer server, 
or the technician’s laptop (if TFTP server software is installed). Before starting 
this procedure, ensure that:

- The firmware files have been stored on the TFTP server.

- The G700 has connectivity to the TFTP server over the customer’s LAN. 

If the TFTP server is on the laptop, and the laptop is not connected to the LAN, you 
can administer a private network between the laptop and G700 with a physical 
connection through one of the Ethernet ports on the G700.

Follow the procedures in this section to install firmware on the G700 processors and media 
modules manually:

●

●

●