Autostart AS-PRG-1000 User Manual
AS PRG-1000
AUTOSTART
TECH TOOL
PRG-1000 Options
• The remote starter can be programmed even when it is solely powered by the
PRG-1000.
• The remote starter or alarm system must be disarmed or in Valet Mode to access
the programmer’s menu. The PRG-1000 displays a “COMMUNICATION
ERROR” message when trying to program an armed unit.
ERROR” message when trying to program an armed unit.
• Select one of the PRG-1000 functions (TACH/Hz, OBDII SCAN, REMOTE,
DIAG., FUNCT, MODULE PROGRAMMING or INSTALLER
PROGRAMMING FILES) to enter its menu.
PROGRAMMING FILES) to enter its menu.
• Use the “UP” and “DOWN” buttons to scroll the available options.
• Press “ENTER” to access the desired option.
• Repeat the above procedure if there are additional options you would like to
• Repeat the above procedure if there are additional options you would like to
access.
• Press “EXIT” to go back to the preceding option.
• Press “ENTER” followed by “WRITE” to save the new settings into the unit’s
processor. New settings can be saved either one at the time or all at once, after all
changes have been completed.
changes have been completed.
Buttons & Functions
1. ON/OFF BUTTON
Press the “ON/OFF” button for 1 second to turn the PRG-1000 on.
• You will hear 3 beeps.
To turn it off, press the “ON/OFF” button for 3 seconds.
• You will hear 2 beeps.
The PRG-1000, if operating on its 9-volt battery, will turn off by itself if left unattended
for more than 5 minutes.
The programmer cannot be turned off, and will not automatically turn off, when it is
powered through one of its link cables. As a reminder, 2 beeps will be heard every 5
minutes if the programmer is left unattended.
This tool is made for a 12-volt DC operation. To avoid damages, do not use it with
other types (24-volt DC, 120 AC, etc.) of power sources.
other types (24-volt DC, 120 AC, etc.) of power sources.
AS PRG-1000
AUTOSTART
TECH TOOL
14. Abbreviation Table of Functions and
Options in Short Words
No. Abbreviation
Description
1 ACC
accessories
2 AUX
auxiliary
3 Bsc
basic
operation
4 Btn
button
5 CF
car
finder
6 Conf
confirmation
7 Config
configuration
8 Const
constant
9 Cus
customized
operation
10
CWM
cold weather mode
11 Dis
disarm
12
DomLite
dome light supervision
13 DZL
diesel
14 F
function
15 Gen
generation
16 Ide
idle
17 IGN
ignition
18 LK
lock
19 m
minute(s)
20 Mcr
multi-car
operation
21 Mon
monitoring
22 ms
millisecond(s)
23 Notif
notification
24 Pass
passive
25
PriorT
priority door unlock
26 RS
remote
start
27 s
second(s)
28 SK
starter
kill
29 SWS
swap
start
30 Temp
temperature
31 Trk
trunk
32 Tub
turbo
33 ULK
unlock
34 V/S
voltage
sense
35 W/
with
36 W/O
without