Auto Page RS-615 User Manual

 

3

XT72S:  This transmitter uses two (2) 3-volt lithium ion batteries 
(#CR2016) that are sandwiched together with the (+) side facing upward.  
To replace the battery, you will need to use a small flat blade screwdriver.  
Locate the small notch on the lower right side of the transmitter case next 
to the key ring.  Using the flat blade screwdriver, carefully pry the top case 
from the bottom case.  It should snap apart after breaking the seal.  
Before removing the batteries note the direction of the positive (+) terminal.  
Place the new batteries in exactly the same manner, being careful not to 
bend or damage the contact terminal.  Snap the cases back together and 
then test the transmitter to insure it arms and disarms the alarm. 
 
 
 
 
 
 
 
 
 
 
 
 
 
ACTIVE LOCK: 
1. Press 

 button on the transmitter. 

2. The horn will chirp once and parking lights will flash once indicating that 

the system is now active. The vehicle doors will lock upon activating 
when interfaced with the keyless entry system. 

 
SILENT LOCKING / UNLOCKING: Pressing the 

 + 

 buttons   

together on the transmitter will lock or unlock your system, No chirp sound 
will be heard, lock / unlock confirmation will be through the   
vehicle’s parking lights only. 
 
ACTIVE UNLOCK: 
1.  Press 

 button on the transmitter. 

2.  The horn will chirp twice and parking light will flash twice to indicating 

that the keyless system is now unlocked. The vehicle doors will 
unlock and dome lights will turn on for 30 seconds.   

3-Volt Batteries