Atlas Copco Stationary Air Compressors User Manual

Instruction book 

2920 1521 00 

44 

 
Starting from the Main screen: 
 
- Use 

the 

↓ key for a quick look at the actual compressor status (see section 8.2) 

- 

Press the key "Menu" (F1), the option "Status data" will be followed by a horizontal arrow: 
- 

either press the tabulator key (5) to select this menu 

- 

or use the 

↓ key to scroll until the desired submenu is followed by a horizontal arrow and then 

press the tabulator key (5) to select this menu 

 
 

 
Procedure 
 
1.  Starting from the Main screen (see section 8.1.2), press the 

↓ key:  A screen similar to the one 

below appears: 

 

Automatic Operation 

 

 

Local Control 

 

 

Week Timer Active 

 

 

↓ 

Mainscreen Help 

Extra 

F1 F2 F3 

 

Fig. 8.4 Example of an actual compressor status display 

 
 
Line 1 indicates the automatic or manual operation status of the regulator: 
 
 

"Automatic operation" means that the regulator automatically adapts the operation of the 
compressor, i.e. starting and stopping the compressor modules according to the programmed 
parameters. 

 
Line 2 indicates whether the regulator operates in local control, remote control or LAN control mode: 
 
 

"Local control" means that the start/stop buttons on the keyboard are activated. 

 

"Remote control" means that these functions are controlled remotely.  Consult Atlas Copco. 

 

“LAN control” means that the compressor can be controlled by an ES controller. 

 
Line 3 indicates whether the timer, which generates time-based start and stop commands is activated 
or not.  See section 8.11. 
 
See section 1.5.7 for the functions of the keys "Mainscreen", "Help" and "Extra". 
 
2. Press 

the 

↓ key to get other data (actual compressor conditions of the compressor) as shown in 

Fig. 8.1.