Atlas Copco Stationary Air Compressors User Manual

Instruction book 

2920 1521 00 

45 

 
The status data submenu gives information regarding the status of the compressor protection 
functions (shut-down, service warning and warning) and allows resetting of a shut-down and service 
condition. 
 
Procedure 
 
Starting from the Main screen (see section 8.1.2): 
- 

Press the key "Menu" (F1), the option "Status data" will be followed by a horizontal arrow 

- 

Press the tabulator key (5) 

 
 

 
In this case, LED (7) is out and the message on the display indicates that all conditions are normal 
(Fig. 8.5): 
 

 

 

 

All Conditions are OK 

 

 

 

 

 

Menu Help   
F1 F2 F3 

 

Fig. 8.5 Example of a status data screen 

 
 

 
In case the compressor is shut down, LED (7) will blink.  A shut-down message exists after an 
emergency stop or after the temperature switch (TSHH20-Fig.2.8) has tripped (indicated on the 
display as Aux. Equipment Overload). 
 
In case of a shut-down due to an emergency stop, a screen similar to the one below will appear: 
 

Emergency Stop 

 

Open 

 

 

 

Shutdown Open 

 

Menu ***

*** Reset 

F1 F2 F3 

 

Fig. 8.6 Example of a status data screen 

 
 
1.  The indicators (***) are blinking.  The screen shows that the compressor is shut down due to an 

emergency stop.  The contacts of the emergency switch are open.  The setting of the shut-down is 
open.