Atlas Copco Stationary Air Compressors User Manual

Instruction book 

2920 1521 00 

59 

2. Use 

the 

↓ key to scroll until the option "Clock function" is followed by a horizontal arrow.  Press the 

tabulator key (5), following screen appears: 

 

Clock Function 

 

 

 

  

Not 

activated 

→ 

 

 

 

 

Menu Modify Delete 

 

F1 F2  F3 

 

 
 
Deleting all commands 
 
Press the key "Delete" (F3) in the screen above.  A question to confirm the deleting operation will 
appear. 
 
 
Deleting all commands related to a specific day  
 
Scroll through the display until the desired day is followed by a horizontal arrow.  Press the key 
"Delete" (F3).  A question to confirm the deleting operation will appear. 
 
 
Deleting a specific start/stop/pressure band command 
 
Scroll through the display until the desired start, stop, pressure band 1 or pressure band 2 command 
line is followed by symbol ┤.  Press the key "Delete" (F3).  A question to confirm the deleting operation 
will appear. 
 
 

 
Function 
 
To reprogram a number of parameters.  See Fig. 8.1. 
 
 
Procedure 
 
1.  Starting from the Main screen (see section 8.1.2): 

- 

press the key "Menu" (F1) 

- press 

the 

↓ key until the option "Modify parameters" is followed by a horizontal arrow 

- 

press the tabulator key (5) to activate the menu 

2. Use 

the 

↓ key to scroll until the option "Configuration" is followed by a horizontal arrow. 

3.  Press the tabulator key (5): The first option shown is "C.C.M" (Compressor Control Mode).  If 

another option is desired, scroll through the display (using 

↓ or ↑ keys) until the option is followed 

by symbol ┤. 

4.  In case of option "Time", the first line indicates the actual setting, e.g. 14:30 followed by symbol ┤.