Atlas Copco Stationary Air Compressors User Manual

Instruction book 

2920 1521 00 

60 

5.  If it is desired to modify the time, press the key "Modify".  If not, press the key "Menu" to return to 

the submenu. 

6.  After pressing the key "Modify", the first field (14) will blink.  Modify the hours using the 

↓ or ↑ 

keys.  Then press the tabulator key (5) to go to the next field (i.e. 30).  The setting of this field can 
now be modified with the 

↓ or ↑ keys. 

7.  The bottom line of the display will show two options: 

- 

"Program" to program the new setting 

- 

"Cancel" to cancel the new setting 

8.  Proceed in a similar way for the other parameters to be modified. 
 
 

 
Compressor control modes 
 
The compressor can be controlled locally, remotely or via a local area network (LAN – consult Atlas 
Copco). 
 
Procedure 
 
1.  Starting from the Main screen (see section 8.1.2): 

- 

press the key "Menu" (F1) 

- press 

the 

↓ key until the option "Modify parameters" is followed by a horizontal arrow 

- 

press the tabulator key (5) to activate the menu 

2. Use 

the 

↓ key to scroll until the option "Configuration" is followed by a horizontal arrow. 

3.  Press the tabulator key (5): The first option shown is "C.C.M." (Compressor Control Mode), 

followed by the actual setting.  Following screen is shown: 

 

C.C.M.   Local 

Control 

┤ 

Pressure Band Selected 

 

Pressure Band 1 

 

Node ID 

 

31 

↓ 

Menu Modify 

 

 

F1 F2  F3 

 

 

Fig. 8.18 Compressor control mode menu 

 
4.  Press the key "Modify" and use 

↓ or ↑ keys to select the desired control mode.  Press the 

"Program" key to program or the "Cancel" key to cancel the modification. 

 
 

 
Function 
 
- 

To reset the service plans which are carried out. 

-  To check for both the next service plans to be carried out and to find which service plans were 

carried out previously.