Atlantis Land A02-UP-W54 User Manual
WIRELESS USB ADAPTER
1.5 Utility(Only for Windows 98/2000/XP)
Go to your Windows Start menu and choose Run, type
“CDRom:\USB\Utility\Setup.exe” in the dialog box and click OK. After finish
the installation, plugged in the Wireless USB Adapter, you will see Wireless
Configuration Utility Country Selector, select the country where you are
using this Wireless device, users are responsible for ensuring that the
channel set configuration is in compliance with the regulatory standards of
these countries.
“CDRom:\USB\Utility\Setup.exe” in the dialog box and click OK. After finish
the installation, plugged in the Wireless USB Adapter, you will see Wireless
Configuration Utility Country Selector, select the country where you are
using this Wireless device, users are responsible for ensuring that the
channel set configuration is in compliance with the regulatory standards of
these countries.
Be noted that selecting the incorrect region
may result in a violation of applicable law; you
will need to select the correct domain. You
will see the icon on the Windows task bar
when you finish the installation.
may result in a violation of applicable law; you
will need to select the correct domain. You
will see the icon on the Windows task bar
when you finish the installation.
When the icon in the toolbar represents in green color, it is properly
connected to the network and if it represents in red color, then it is not
connected to the network.
connected to the network and if it represents in red color, then it is not
connected to the network.
1.6 Connecting to a Wireless Network
1.6.1 Using Utility (Only for Windows 98/2000/XP)
The IEEE802.11g WLAN Card Configuration Utility icon will appear in your
computer’s system tray. Right-click the icon and select “Open” to bring up
the utility. In the Configuration Utility, select “Network” tab, and click
“RESCAN” button to search the available wireless network(s). Select the
network you want. If you have not enabled wireless encryption on your
network, then just click “CONNECT” button to activate wireless connection. If
the wireless encryption is enabled please type the network security
key(WPA-PSK or WEP). If the screen doesn’t show any available wireless
network, click “ADD PROFILE” button to setup encryption or SSID.
computer’s system tray. Right-click the icon and select “Open” to bring up
the utility. In the Configuration Utility, select “Network” tab, and click
“RESCAN” button to search the available wireless network(s). Select the
network you want. If you have not enabled wireless encryption on your
network, then just click “CONNECT” button to activate wireless connection. If
the wireless encryption is enabled please type the network security
key(WPA-PSK or WEP). If the screen doesn’t show any available wireless
network, click “ADD PROFILE” button to setup encryption or SSID.
1.6.2 Using ZCW(Only for Windows Vista 32/64)
Click Start button, then Contro Panel (Classic View). Double click Network
and Sharing Center icon. Double-click the Wireless LAN icon (802.11 USB
Wireless Lan Adapter). Now the wireless NIC updates information on
surrounding wireless network. Chose Your Wireless Network and click on
Connect. Type the network security key or passphrase , click Connect then
Close.
and Sharing Center icon. Double-click the Wireless LAN icon (802.11 USB
Wireless Lan Adapter). Now the wireless NIC updates information on
surrounding wireless network. Chose Your Wireless Network and click on
Connect. Type the network security key or passphrase , click Connect then
Close.