Atdec Projector Accessories TH-PPE-24 Leaflet
Step 2. Assembly
TH-PPE-24
Component Checklist
! IMPORTANT - Install Telehook Projector Pole as per
installation instruction.
! This product supports a maximum load of 454kg (1000lbs.).
! The manufacturer accepts no responsibility for incorrect installation.
IMPORTANT INFORMATION:
Step 1. Check Components
Check you have received all parts against the component checklist and hardware above.
Pole Connector
Plastic Cover
HARDWARE
Set Screw
(x4)
Security Screw
(x4)
Extension Pole
2.1. When pole & connector are
in place, secure by inserting the 4
Standard OR Security Set Screws
using the supplied Allen key.
in place, secure by inserting the 4
Standard OR Security Set Screws
using the supplied Allen key.
Removable
Plastic Cover
Plastic Cover
Existing Installation
Thread must be 1.5”
NPT
NPT
Extension
Pole
Technical Specifications
54mm (2.1”)
76mm
(3”)
24”
(609.6mm)
649.6mm
(25.5”)
1.5”NPT
1.5”NPT
1.5”NPT
48mm
(1.9”)
2.5mm Security
Allen Key
OD
ID
41.8mm
(1.6”)
Installation Instructions & Technical Specifications
General Features
Maximum Weight:
454kg (1000lbs)
454kg (1000lbs)
Pole Compatibility:
Colour: Warranty:
1.5” NPT White 10 years
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 24.05.13 ©
39.1mm
(1.5”)
47.3mm
(1.8”)
24” (610mm) Fixed Length Projector Pole Accessory
Note: Pole can be installed in
reverse orientation.
reverse orientation.