Ariens Ventilation Hood SBXC900SS User Manual

 

1

GENERAL 
1. Carefully read the following important information regarding installation safety and 

maintenance. Keep this information booklet accessible for further consultations. 

2. The appliance has been designed as a exhausting version (external exhaust) or as a 

charcoal filter version (internal air recycle) cooker hood. 
 
SAFETY  PRECAUTION 
1. Take care when the cooker hood is operating simultaneously with an open fireplace 

or burner that depends on the air in the environment and is supplied by other than 

electrical energy, as the cooker hood removes the air from the environment which a 

burner or fireplace need for combustion. 

2. Provide adequate ventilation in the environment for a safe operation of the cooker 

hood. Do Not flame under the range hood. 

3. 

There shall be adequate ventilation of the room when the range hood is used at the 

same time as appliance burning gas or other fuels. 

4. Follow the local laws applicable for external air evacuation. 

5. Appliance shall only be used with rated voltage and frequency. 

6. There is a fire risk if cleaning is not carried out in accordance with the 
instruction, it is advised to be cleaned once per month

. 

 
WARNING!! 
In certain circumstances electrical appliances may be a danger hazard. 

1.  Do not check the status of the filters while the cooker hood is operating.   

2.  Do not touch the light bulbs after appliance use. 

3.  Do not disconnect the appliance with wet hands and without to force the supply 

cord. 

4.  Avoid free flame, as it is damaging for the filters and a fire hazard. 

5.  Constantly check food frying to avoid that the overheated oil may become a fire 

hazard.  

6.  Disconnect the electrical plug prior to any maintenance. 

7.  Children don’t recognize the risks of electrical appliances. Therefore use or keep 

the appliance only under supervision of adults and out of the reach from children.   

 
OPERATION OF CONTROLS 
The hood is operated using the push button on the front panel. 

The light switch turns the lamps on and off. 

The blower switch turns the blower on to three speed settings: 

0 - OFF 

1 - LOW SPEED 

2 - MEDIUM SPEED 

3 - HIGH SPEED 

4 - LIGHT