Areca ARC-1110 User Manual

136

To create pass-through disk, move the mouse cursor to the main 

menu and click on the “Create Pass-Through” link. The “rela-

tive setting function” screen appears.  A pass-through disk is not 

controlled by the SATA RAID controller firmware, it cannot be a 

part of a volume set. The disk is available to the operating system 

as an individual disk. It is typically used on a system where the 

operating system is on a disk not controlled by the RAID firm-

ware. The user can also select the cache mode, Tagged Command 

Queuing, SCSI channel/SCSI_ID/SCSI_LUN for this volume.

 

Use this option to modify the “Pass-Through Disk Attribute”. The 

user can modify the cache mode, Tagged Command Queuing,  

and SCSI channel/ID/LUN on an existing pass through disk.

To modify the pass-through drive attribute from the pass-through 

drive pool, move the mouse cursor bar and click on the “Modify 

Pass-Through” link. The “Select The Pass Through Disk For Modi-

fication” screen appears mark the checkbox for the Pass-Through 

Disk from the pass-through drive pool and click on the “Submit” 

button to select drive.