Areca ARC-1110 User Manual

86

When you choose this option, the physical disks connected to 

the SATA RAID controller are listed. Move the cursor to the de-

sired drive and press Enter to view drive information.

A Pass-Through Disk is not controlled by the SATA RAID con-

troller firmware and thus cannot be a part of a volume set. The 

disk is available directly to the operating system as an individual 

disk. It is typically used on a system where the operating sys-

tem is on a disk not controlled by the SATA RAID controller firm-

ware. The SCSI Channel, SCSI ID, SCSI LUN, Cache Mode, and 

Tag Queuing must be specified to create a pass-through disk.

Use this option to modify Pass-Through Disk Attributes. To select 

and modify a Pass-Through Disk from the pool of Pass-Through 

Disks, move the cursor bar to the “Physical Drive Function” 

menu and select the “Modify Pass-Through Drive” option and 

then press the Enter key. The “Physical Drive Function” menu 

will show all Raid Pass-Through Drive number options. Move the 

cursor bar to the desired item and then press the Enter key 

to show all Pass-Through Disk Attributes. Select the parameter 

from the list to be changed and them press the Enter key to 

modify it.

Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System

ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw

Areca Technology Corporation RAID Controller

Main Menu

Quick Volume/Raid Setup

Raid Set Function

Volume Set Function

Physical Drives

Raid System Function

Ethernet Configuration

View System Events

Clear Event Buffer

Hardware Monitor

System information

Physical Drive Information

Physical Drive Information

View Drive Information

Modify Pass-Through Disk

Delete Pass-Through Disk

Identify Selected Drive

Create Pass-Throught

Select The Drive

Ch04|    80.0GB|     Free          |ST380013AS

Ch01|    80.0GB|     Free          |ST380013AS

Pass-Through Disk Attribute

SCSI ID             :  0

SCSI LUN         :  0

Cache Mode       :  Write Back

Tag Queuing      :  Enabled

SCSI Channel    :  0

Create Pass-Through

No

Yes