Arboria Hampton Landscape Screen Leaflet

Division of  LWO Corporation 

3841 N. Columbia Blvd. 

Portland, Oregon 97217 

(503) 286-5372  (800) 459-8718 

 

 
Screens are equipped with (2) 36” Steel Stakes for in-ground, freestanding 
installation.  These can be mounted to either the side or back of the Base 
Panel. 
 
Placement of Stakes 
If mounting the Stakes on the back of the Base Panel, drive the first stake 
14” to 18” into the ground in the desired location.  Be sure to position the 

stake such that the top edge of the “U” shaped stake faces the Panel.  

Measure 34” apart from this first stake and then drive your second stake 
14” to 18” into the ground. 
 
 If mounting the Stakes on the side of the Base Panel, drive the first stake 
14” to 18” into the ground in the desired location.  Measure 36.5” apart 

from this first stake, between which your Base Panel will be installed, and 
then drive your second stake 14” to 18” into the ground. 
 
Attaching Panel to Stakes 
We recommend installing the screen so that the bottom of the posts are 
1” above the ground. 
 
 Use the 1 5/8” wood screws to secure the screen to the stakes.  Screw 

through the holes in the stake into the Panel frame and be sure to use the 
highest and lowest possible holes on each post.