Apollo ESP6000 User Manual

 

70 ECM-3612 User’s Manual 

 

 

Use this menu to specify your settings for integrated peripherals. 

 

3.5.4.1  OnChip IDE Channel10/11 
The chipset contains a PCI IDE interface with support for two IDE channels. Select Enabled 
to activate the primary IDE interface. Select Disabled to deactivate this interface. 
The choices: Enabled, Disabled. 

3.5.4.2  IDE Prefetch Mode 
For faster drive accesses. If you install a primary and/or secondary add-in IDE interface, set 
this field to Disabled if the interface does not support prefetching. 
The choices: Enabled, Disabled. 

The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4) for each 
of the four IDE devices that the onboard IDE interface supports. Modes 0 through 4 provide 
successively increased performance. In Auto mode, the system automatically determines 
the best mode for each device. 
The choices: Auto, Mode 0, Mode 1, Mode 2, Mode 3, or Mode 4. 

Ultra DMA/33 implementation is possible only if your IDE hard drive supports it and the 
operating environment includes a DMA driver (Windows 95 OSR2 or a third-party IDE bus 
master driver). If your hard drive and your system software both support Ultra DMA/33, 
select Auto to enable BIOS support. 
The choices: Auto, Disabled. 

3.5.4.5  Init Display First 
This item allows you to decide to active whether PCI Slot or AGP first. 
The choices: PCI Slot, AGP.