Apollo ESP6000 User Manual

 

82 ECM-3612 User’s Manual 

 

 

 
When a password has been enabled, you will be prompted to enter it every time you try to 
enter Setup. This prevents an unauthorized person from changing any part of your system 
configuration. Additionally, when a password is enabled, you can also require the BIOS to 
request a password every time your system is rebooted. This would prevent unauthorized 
use of your computer. You determine when the password is required within the BIOS 
Features Setup Menu and its Security option (see Section 3). If the Security option is set to 
“System”, the password will be required both at boot and at entry to Setup. If set to “Setup”, 
prompting only occurs when trying to enter Setup 

Save CMOS value changes to CMOS and exit setup. 
Enter <Y> to store the selection made in the menus in CMOS, a special section in memory 
that stays on after turning the system off. The BIOS configures the system according to the 
Setup selection stored in CMOS when boot the computer next time. 
The system is restarted after saving the values.