Apollo ESP6000 User Manual

 

ECM-3612 User’s Manual 

 

97

 

20.  PRESS A KEY TO REBOOT 
This will be displayed at the bottom screen when an error occurs that requires you to reboot. 
Press any key and the system will reboot. 

21.  PRESS F1 TO DISABLE NMI, F2 TO REBOOT 
When BIOS detects a Non-maskable Interrupt condition during boot, this will allow you to 
disable the NMI and continue to boot, or you can reboot the system with the NMI enabled. 

22.  RAM PARITY ERROR - CHECKING FOR SEGMENT ... 
Indicates a parity error in Random Access Memory. 

A valid board ID was found in a slot that was configured as having no board ID. 

When either of these errors appears, the system will boot in ISA mode, 
which allows you to run the EISA Configuration Utility. 

The board installed is not responding to the ID request, or no board ID has been found in 
the indicated slot. 

When either of these errors appears, the system will boot in ISA mode, 
which allows you to run the EISA Configuration Utility. 

25.  Slot Not Empty 
Indicates that a slot designated as empty by the EISA Configuration Utility actually contains 
a board. 

When either of these errors appears, the system will boot in ISA mode, 
which allows you to run the EISA Configuration Utility. 

26.  SYSTEM HALTED, (CTRL-ALT-DEL) TO REBOOT ... 
Indicates the present boot attempt has been aborted and the system must be rebooted.  
Press and hold down the CTRL and ALT keys and press DEL.