Antex electronic XM-100 User Manual

When preset channels have been set, you can access those 
presets simply by pressing the PRESET button on the remote, 
then an appropriate  numeric button. For example, if preset 0 
were set to Rock, preset 1 to Hits, and preset 2 to News, you 
could jump to the News channel quickly by pressing “PRESET-2.” 

The channels of the XM service are conveniently organized into 
categories such as Hits, Rock, News, Sports, etc. To enter 
Category Mode, press the “MODE” button on the front panel to 
illuminate the “CAT” LED on the front panel. Alternatively, 
press the CAT button on the remote control. 

Press the up/down buttons to tune to a different category. 
Note that the category name, channel number, artist name, 
and song title information in the display change to reflect the 
new category. A channel’s category may be displayed at any 
time by entering Category Mode. 

The XM-100 can store up to 10 channel presets (numbered 0 
to 9). To assign a preset, first tune to a desired channel, in 
this example 44. Then press and hold the PRESET button on 
the remote for 4 seconds. The display will change to: 

SAVE 044 TO

PRESET NO.?

 

Press the numeric button you wish to assign this channel to 
and it will be stored. 

To recall a stored preset, press (but don’t hold) the PRESET 
button. The display will indicate Preset? -  simply select the