AMX AXB-REL8 User Manual

Dimensions (HWD)

1.51" x 5.55" x 5.45" (3.84 cm x 14.10 cm x 13.84 cm)

Enclosure

Non-glare, high-impact black matte plastic

Power Consumption

Baseline draw

With all 8 relays On

• 90 mA @ 12 VDC (min)

• 170 mA @ 12 VDC (max)

AXlink Status indicator

AXlink LED (green and blinks to indicate AXlink communication activity and

power:

• Full-Off indicates no power is being received or the controller is not 

functioning properly.

• One blink per second indicates power is active and AXlink communication is 

functioning.

• Full-On indicates there is no AXlink control or activity, but power is On.

Device DIP switch

An eight-position DIP switch is used to set the device number for the 
AXB-REL8.

Relay LEDs 1-8 (Red)

Illuminate when associated relay is closed. Relay LED's should match panel 
control function.

AXlink connector

Four-pin captive wire receives power and information via the AXlink bus and 
AXlink system controller.

Relay contacts

Eight (normally -open) isolated two-pin relay contacts 1 A @ 28 VAC or VDC:

• Relays 1-4   can share a common if use jumper"A" pins with a tab strip

• Relays 5-8   use discrete commons (wire commons individually)