AMX MET-ECOM-D User Manual
Mounting and Installation
19
Metreau Entry Communicators
5.
Install the (provided) Ferrite clip onto the Ethernet cable (see FIG. 8 on page 12).
6.
Connect the Ethernet cable in the back of the Metreau Entry Communicator.
7.
Insert the Metreau Entry Communicator into the wall box, and push until the device is flush to the
wall.
wall.
FIG. 17
Metreau Entry Communicators wall box
Expansion clip
installation tabs
Rough-in
installation tabs
Keyhole Ethernet
cable access
Earth
ground
point
The device and wall box must have an Earth ground.