AMX MET-ECOM-D User Manual
Using the Configuration Manager
49
Metreau Entry Communicators
Setting Device Video
1.
In the Audio/Video page, select the Video tab.
2.
Click the radio button to select the Video Port type.
3.
Click the radio button to select the video Codec type.
4.
Select the video Orientation setting from the drop-down menu.
5.
Select the video Light Level setting from the drop-down menu.
6.
Select the video White Balance setting from the drop-down menu.
7.
If necessary, use the sliders to change the Red/Green/Blue levels.
8.
Select the Flicker Correction speed setting from the drop-down menu.
9.
Use the sliders to change the Frame Rate speed.
10.
If necessary, use the sliders to change the Contrast/Saturation/Gamma levels.
11.
Click Accept.
Audio/Video Page - Display Settings Tab
Click the Display tab in the Audio/Video Page to access the Display Settings tab (FIG. 44). Use the
options in this tab to view/edit display specific settings.
options in this tab to view/edit display specific settings.
Audio/Video Page - Video Settings Tab (Cont.)
Red
0 - 255 scale for the Red balance.
Green
0 - 255 scale for the Green balance.
Blue
0 - 255 scale for the Blue balance.
Flicker Correction
• Anti-flicker Mode - The device automatically compensates for flicker.
• 50 Hz - Sets the flicker refresh to 50 Hz.
• 60 Hz - Sets the flicker refresh to 60 Hz.
• 50 Hz - Sets the flicker refresh to 50 Hz.
• 60 Hz - Sets the flicker refresh to 60 Hz.
Wired Frame Rate
0 - 100 rate of frame display on the device, in hard-wired installations.
Wireless Frame Rate
0 - 100 rate of frame display on the device, in wireless installations.
Contrast
0 - 100 scale for contrast display from device.
Saturation
0 - 100 scale for saturation display from device.
Gamma
0 - 100 scale for gamma display from device.
FIG. 44
Audio/Video Page - Display Settings tab