AMX MET-ECOM-D User Manual

Programming

55

 Metreau Entry Communicators 

Face Plate LED Commands

Metreau Entry Communicators support the following LED face plate SEND_COMMANDs on port 1. 

Face Plate LED Commands

Adjusts the brightness of the LED. 
To turn the LED ON or OFF. 

Syntax:

SEND_COMMAND <DEV>,"'SET LED-LEVEL <state> 

<level>'"

Variable:
•    State = ON, OFF
•    Level = 0 – 100. Represents 0%(dimmest) to 100% brightest.
Example:

SEND_COMMAND MET1,'"SET LED-LEVEL ON 50'"

Sets the LED brightness level ON at 50%.

Retrieves the brightness of the 
LED. To turn the LED ON or OFF. 

Syntax:

SEND_COMMAND <DEV>,"'GET LED-LEVEL'"

Example:

SEND_COMMAND MET1,"'GET LED-LEVEL'"

Returns:

LEDLEVEL = <state> <level>

Sets the state of the front button 
LED.

Syntax:

SEND_COMMAND <DEV>,"'SET LED-STATE <State>’"

Variable:
•    State = IDLE, ACTIVE
Example:

SEND_COMMAND MET1,"'GET LED-STATE ACTIVE’"

Sets the LEDS in an active pulsing state.

Retrieves the brightness of the 
LED. To turn the LED ON or OFF. 

Syntax:

SEND_COMMAND <DEV>,"'GET LED-STATE'"

Returns:

IDLE, ACTIVE

Example:

SEND_COMMAND MET1,"'GET LED-STATE’"

Returns:

’LEDSTATE = ACTIVE’