American Standard ALTO 70145A 11/00 User Manual
Page 4
AMERICAN SANDERS TECHNOLOGY Classic 8 Operator's Manual
DANGER:
This machine had rotating and moving elements that can cause serious injury. Follow
these precautions:
these precautions:
•
Do not operate this machine unless all guards, doors and covers are secure and in
place.
place.
•
Keep hands, feet and loose clothing away from all moving parts.
•
Do not service the machine while in operation. Disconnect the electrical cord before
servicing.
servicing.
•
Do not change or make adjustments to the abrasive while the machine is in operation.
WARNING:
Any alterations, modifications or misuse of this machine, could result in damage to the
machine or injury to the operator or bystanders. Alterations, modifications or uses not
authorized by the manufacturer, voids any and all warranties and liabilities.
machine or injury to the operator or bystanders. Alterations, modifications or uses not
authorized by the manufacturer, voids any and all warranties and liabilities.
WARNING:
Do not operate a machine that is damaged or malfunctioning. Follow the maintenance
schedule found in the "Routine Maintenance" section in this manual.
schedule found in the "Routine Maintenance" section in this manual.
WARNING:
Wear eye, ear, respiratory protection and protective clothing while sanding.
WARNING:
See that the control switch is off and the drum raised before connecting the machine to an
electrical circuit. Keep hands on the operating controls while sanding.
electrical circuit. Keep hands on the operating controls while sanding.
CAUTION:
Refer all maintenance and repairs to an authorized repair center.
CAUTION:
The machine is heavy. See the "How To Transport" section in this manual.
CAUTION:
Observe all warning and instructional labels on this machine. Replace any lost or damaged
labels.
labels.
CAUTION:
Use of this machine to move other objects or to climb on could result in injury or damage.
Do not use this machine as a step or furniture. Do not ride on this machine.
Do not use this machine as a step or furniture. Do not ride on this machine.
CAUTION:
Serious damage to the floor can occur if the machine is left running in one spot while the
sanding drum is in contact with the floor. To avoid damage to the floor, feather cut in at a
normal sanding rate. Do not dwell while lowering or raising the contact wheel. Always
sand at a constant rate.
sanding drum is in contact with the floor. To avoid damage to the floor, feather cut in at a
normal sanding rate. Do not dwell while lowering or raising the contact wheel. Always
sand at a constant rate.
IVIE Enterprises
www.ivie-ent.com
Ph:(918)254-5161 or (888)262-5161 Fax:(918)250-4807