American Dynamics MegaPower CPU ADMPCPU User Manual
MEGAPOWER CPU
8200-0421-03, REV. G
ADMINISTRATOR’S GUIDE
70 of 82
Function Action
55-F2
Entering this key combination implies that
you will also enter another 2-digit F2 code
combination within three seconds: 99-F2 -
System Reset or 98-F2 – Reset to Factory
Defaults
you will also enter another 2-digit F2 code
combination within three seconds: 99-F2 -
System Reset or 98-F2 – Reset to Factory
Defaults
60-F2
Displays current day of week
61-F2
Sets day of week to Sunday
62-F2
Sets day of week to Monday
63-F2
Sets day of week to Tuesday
64-F2
Sets day of week to Wednesday
65-F2
Sets day of week to Thursday
66-F2
Sets day of week to Friday
67-F2
Sets day of week to Saturday
70-F2
Momentarily displays software version
number as “V - - -” in the camera title field of
the selected monitor
number as “V - - -” in the camera title field of
the selected monitor
91-F2
Changes which unit is Active
92-F2
Writes app data (cameras selected on
keyboards and other info) to Flash. Entering
92-F2 ten seconds before a front panel reset
eliminates the need to resynchronize
cameras to monitors
keyboards and other info) to Flash. Entering
92-F2 ten seconds before a front panel reset
eliminates the need to resynchronize
cameras to monitors
93-F2
Loads the dynamically defined character set
to the BVOM
to the BVOM
98-F2
Used in combination with 55-F2 to reset the
MPCPU to factory defaults, except the direct
port settings. This function does nothing by
itself.
MPCPU to factory defaults, except the direct
port settings. This function does nothing by
itself.
99-F2
Used in combination with 55-F2 to reset the
MPCPU. This function does nothing by itself.
MPCPU. This function does nothing by itself.
100-F2
Sets video loss mode to OFF for the called
camera
camera
101-F2
Sets video loss mode to SYNC ONLY for
camera
camera
102-F2
Sets video loss mode to VIDEO LOW for
camera
camera
103-F2
Sets video loss mode to VIDEO MED for
camera
camera
104-F2
Sets video loss mode to VIDEO HIGH for
camera
camera
105-F2
Sets video loss mode automatically for
called camera
called camera
106-F2
Sets DBVL mode for all cameras
automatically and transfers settings to the
CPUs to synchronize databases
automatically and transfers settings to the
CPUs to synchronize databases
107-F2
Updates video loss mode settings of all
cameras from matrix switcher to the Video
Loss Detection module
cameras from matrix switcher to the Video
Loss Detection module
108-F2
Clears the video loss mode for all cameras
Function Action
109-F2
Downloads video loss mode of called
camera from VLD module to matrix switcher
camera from VLD module to matrix switcher
110-F2
Transfers video loss mode of all cameras
from VLD module to matrix switcher
from VLD module to matrix switcher
120-F2
End Pattern Definition
121-F2
Define Pattern 1
122-F2
Define Pattern 2
123-F2
Define Pattern 3
130-F2
Save New Pattern
131-F2
Clear Pattern 1
132-F2
Clear Pattern 2
133-F2
Clear Pattern 3
200-F2
Frees remote PTZ slots
202-F2
Resets all Alarms
300-F2
Displays current arming code for selected
monitor
monitor
301-F2
SSI Monitor Arming
(1)
302-F2
SSA Monitor Arming
(1)
303-F2
SSM Monitor Arming
(1)
304-F2
SHI Monitor Arming
(1)
305-F2
SHA Monitor Arming
(1)
306-F2
SHM Monitor Arming
(1)
307-F2
BSI Monitor Arming
(1)
308-F2
BSA Monitor Arming
(1)
309-F2
BSM Monitor Arming
(1)
310-F2
BHI Monitor Arming
(1)
311-F2
BHA Monitor Arming
(1)
312-F2
BHM Monitor Arming
(1)
313-F2
DHI/DSI Monitor Arming
(1)
314-F2
DHA/DSA Monitor Arming
(1)
315-F2
DHM/DSM Monitor Arming
(1)
316-F2
Disarm Monitor
317-F2
Enable Manual Override
318-F2
Disable Manual Override
998-F2
Transfer Macro from keyboard to system
999-F2
Transfer Macro from system to keyboard
Note:
(1)
For an explanation of monitor arming codes, refer to
APPENDIX I: Monitor Arming Codes on page 76.
APPENDIX I: Monitor Arming Codes on page 76.