AMCC 9550SX-8LP User Manual

Chapter 1. Installing an AMCC 3ware 9550SX RAID Controller

12

8

Check that the 3ware RAID controller’s metal bracket covers 
the hole in the case and secure the bracket with the screw that 
was used to secure the filler bracket in step 5.

To connect the SATA cables to the drives

1

If your drives are not already installed in the computer chassis 
or hot swap carriers, install them now. Be sure that the drives 
are connected to the power supply, either by cable or through 
the drive cage. 

2

For each drive, select the end of an SATA cable not connected 
to the 3ware RAID Controller and plug it into the drive or drive 
carrier. 

One edge of each SATA cable connector is keyed to ensure 
proper installation. 

3

(Optional) Connect the drive activity LED connectors. For 
details, see the connection details on “Connecting Drive 
Activity LED Indicators” on page 17. 

For a discussion of whether to make these connections, see 
“Whether to Use the LED Status Connector” on page 3.

4

Turn  to  “Check Installation and Close the Case” on page 21.