AMANO HandPunch 1000 Installation Instruction
HandPunch 1000 Installation and Operation Manual
Revision 1.2
Page 35
8.7
Service Menu
The Service menu commands provide information that help you determine if the
HandPunch is performing within normal operating parameters. The following section
provides a brief summary of the Service Menu commands.
HandPunch is performing within normal operating parameters. The following section
provides a brief summary of the Service Menu commands.
There are no user serviceable parts inside the HandPunch.
8.7.1
Navigating the Service Command Menu
Enter the appropriate password to enter the Service command menu. Once you have
entered the command menu, there are three options available for navigating the
command menu system.
entered the command menu, there are three options available for navigating the
command menu system.
•
Press
to enter the command shown on the display.
•
Press
to step to the next command in the menu.
•
Press
to exit the command menu (pressing any numeric key also exits
the command menu). If you are in a command’s sub-menu, press
multiple times to completely exit the command menu.
8.7.2
Service Commands
There are two commands available from the Service command menu.
•
Calibrate
•
Status Display
Refer to Table 4 and identify the command you need to perform. Step through all
previous commands until you reach the desired command.
previous commands until you reach the desired command.
NOTE
#
*
CLEAR
CLEAR
Table 4: Service Command Menu
Service Menu
Password = 1
Calibrate
Recal (Y/N)
Status Display
On/Off (Y/N)