Aluratek AIRMM02F User Manual

Steps to upgrade new firmware in the device via a USB drive

Copy the new firmware to the ROOT directory of a USB drive or a USB 

MP3 player. (Note. Please DON’T modify the file name, otherwise the 

AIRMM02F can’t find the new F/W)

Power on the AIRMM02F and then plug-in the USB drive into the front 

USB port of the AIRMM02F.

Operate the AIRMM02F to get into the F/W upgrade menu (“Setup\Ad-

vanced Setup\F/W Upgrade(thru. USB)”), then press the OK button to 

activate the 

F/W Upgrade function. You should see the following messages “F/W 

Upgrading”, and “Don’t Power OFF!!”. After a few seconds, the device 

will reboot automatically when the upgrade operation is completed.

You can verify the firmware upgrade is successful by checking the firm-

ware version from the menu “Setup\Advanced Setup\Firmware Version”.

Prior to setting the alarm, you need to set the clock of AIRMM02F. First, 

select the Setup function from the Main Menu.

The first item “Clock” is for the date and time setting. Press OK or  “    ” 

button to set the clock value.

There are 3 items in the clock menu, the first one will display the cur-

rent date and time; the second item is for you to set the date and time 

manually or via auto-Sync (automatically synchronize with network time 

server). If you select the “Auto-sync” function, the device will periodically 

synchronize with the server. The third option lets you change time dis-

play format between 12-Hours or 24-Hours. There is a built-in battery in 

the device, so if you power off the device, the clock will continue to run.