ALTINEX MULTI-TASKER MT109-102 User Manual
MULTI-TASKER™
400-0343-003
2
2
PRECAUTIONS / SAFETY WARNINGS ....... 1
Please read this manual carefully before using
your MT109-102. Keep this manual handy for
future reference. These safety instructions are to
ensure the long life of your MT109-102 and to
prevent fire and shock hazard. Please read them
carefully and heed all warnings.
your MT109-102. Keep this manual handy for
future reference. These safety instructions are to
ensure the long life of your MT109-102 and to
prevent fire and shock hazard. Please read them
carefully and heed all warnings.
1.1 GENERAL
•
Qualified ALTINEX service personnel, or their
authorized representatives, must perform all
service.
authorized representatives, must perform all
service.
•
To prevent fire or shock, do not expose this unit
to rain or moisture. Do not place the MT109-102
in direct sunlight, near heaters or heat radiating
appliances, or near any liquid. Exposure to
direct sunlight, smoke, or steam can harm
internal components.
to rain or moisture. Do not place the MT109-102
in direct sunlight, near heaters or heat radiating
appliances, or near any liquid. Exposure to
direct sunlight, smoke, or steam can harm
internal components.
•
Handle the MT109-102 carefully. Dropping or
jarring can damage the card.
jarring can damage the card.
•
Do not pull the cables that are attached to the
MT109-102.
MT109-102.
•
Insert the card carefully into the slots of the
Multi-Tasker™ without bending any edges.
Multi-Tasker™ without bending any edges.
1.2 CLEANING
•
Clean only the connector area with a dry
cloth. Never use strong detergents or solvents,
such as alcohol or thinner. Do not use a wet
cloth or water to clean the card. Do not clean or
touch any component or PCB.
such as alcohol or thinner. Do not use a wet
cloth or water to clean the card. Do not clean or
touch any component or PCB.
1.3 FCC / CE NOTICE
•
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
•
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment. This equipment generates, uses,
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications. Operation
of this equipment in a residential area is likely to
cause harmful interference in which case the
user will be required to correct the interference
at their expense.
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment. This equipment generates, uses,
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications. Operation
of this equipment in a residential area is likely to
cause harmful interference in which case the
user will be required to correct the interference
at their expense.
•
Any changes or modifications to the unit not
expressly approved by ALTINEX, Inc. could void
the user’s authority to operate the equipment.
expressly approved by ALTINEX, Inc. could void
the user’s authority to operate the equipment.