ALTINEX CP450 Series User Manual

Page of 24
SPECIAL APPLICATION
400-0517-001
2
PRECAUTIONS / SAFETY WARNINGS
1
Please read this manual carefully before using your
CP450 and keep it handy for future reference. 
These safety instructions are to ensure the long life 
of your CP450 and to prevent fire and shock 
hazards. Please read them carefully and heed all 
warnings.
1.1  GENERAL
Do not open the unit or power supply case, there 
are high-voltage components inside.
There are no user serviceable parts inside. 
Qualified ALTINEX service personnel must 
perform all service on the CP450.
Handle the CP450 carefully.
1.2  HANDLING
For best results, place the CP450 in a dry area 
away from dust and moisture.
To prevent fire or shock, do not expose this unit 
to water or moisture. Do not place the CP450 in 
direct sunlight, near heaters, or heat-radiating 
appliances, or near any liquid. Exposure to direct 
sunlight, smoke, or steam can harm internal 
components.
Handle the CP450 carefully. Dropping or jarring 
can damage the unit.
Do not pull any cables that are attached to the 
CP450.
Do not place heavy objects on top of the CP450.
If the CP450 is not used for an extended period, 
disconnect the adapter from the wall to avoid 
fire, shock, and loss of power.
1.3  CLEANING
Unplug the CP450 adapter before cleaning.
Clean only with a dry cloth. Never use strong 
detergents or solvents such as alcohol or 
thinner. Do not use a wet cloth or water to clean 
the unit. Do not open the unit to clean.
1.4  FCC NOTICE
This device complies with Part 15 of the FCC 
Rules. Operation is subject to the following two 
conditions: (1) This device may not cause 
harmful interference, and (2) this device must 
accept any interference received, including 
interference that may cause undesired 
operation.
This equipment has been tested and found to 
comply with the limits for a Class A digital 
device, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide reasonable 
protection against harmful interference when the 
equipment is operated in a commercial 
environment. This equipment generates, uses, 
and can radiate radio frequency energy and if 
not installed and used in accordance with 
instructions found herein, may cause harmful 
interference to radio communications. Operation 
of this equipment in a residential area is likely to 
cause harmful interference in which case the 
user will be required to correct the interference
at his own expense.
Any changes or modifications to the unit not 
expressly approved by ALTINEX, Inc. could void 
the user’s authority to operate the equipment.