ALTINEX MT107-203 User Manual
MULTITASKER
400-0371-004
8
Cause 3:
The path is not selected.
Solution:
Make sure the input to output path is
correctly selected.
correctly selected.
For example, Input 2 is connected to
Output 1 in the Matrix Engine status.
Physically, the source signal should
be connected to Input 2 and the
display cable should be connected
to Output 1. See RS-232 accessible
commands in Section 7 of the
MT107-104
Output 1 in the Matrix Engine status.
Physically, the source signal should
be connected to Input 2 and the
display cable should be connected
to Output 1. See RS-232 accessible
commands in Section 7 of the
MT107-104
User’s
Guide for
command details.
If no display is present, see
Cause 4.
Cause 4.
Cause 4:
Cable connections are incorrect.
Solution:
Make sure that cables are properly
connected. Also, make sure that the
continuity and wiring are good. If
there is still no display present, see
Cause 5.
connected. Also, make sure that the
continuity and wiring are good. If
there is still no display present, see
Cause 5.
Cause 5:
The display has a problem.
Solution:
Make sure the display is powered
and is turned on. If there is still no
display, please call ALTINEX at
(714) 990-2300.
and is turned on. If there is still no
display, please call ALTINEX at
(714) 990-2300.
ALTINEX POLICIES
9
9.1 LIMITED WARRANTY/RETURN POLICIES
Please see the ALTINEX website at
for details on warranty and
return policies.
9.2 CONTACT INFORMATION
ALTINEX, Inc.
592 Apollo Street
Brea, CA 92821 USA
TEL: 714 990-2300
TOLL FREE: 1-800-ALTINEX
WEB:
E-MAIL: