Alpine IVA-D900 User Manual
38
-EN
XM Radio (Optional)
Receiving XM Channels with the XM
Receiver (Optional)
Receiver (Optional)
XM Satellite Radio* is the next generation of audio entertainment,
with up to 100 brand-new digital channels. For a small monthly fee,
subscribers can hear crystal-clear music, sports, news and talk, coast-
to-coast via satellite. For more information, visit XM’s website at
www.xmradio.com or call 1-800-852-9696.
with up to 100 brand-new digital channels. For a small monthly fee,
subscribers can hear crystal-clear music, sports, news and talk, coast-
to-coast via satellite. For more information, visit XM’s website at
www.xmradio.com or call 1-800-852-9696.
An optional XM Satellite Radio Receiver (TUA-T021XM) and an
optional XM Antenna may be connected to the IVA-D900. With an
XM Receiver connected to the Ai-NET input of the IVA-D900, the
XM Receiver will be controllable from the IVA-D900.
optional XM Antenna may be connected to the IVA-D900. With an
XM Receiver connected to the Ai-NET input of the IVA-D900, the
XM Receiver will be controllable from the IVA-D900.
* XM and its corresponding logos are trademarks of XM
Satellite Radio Inc.
• The controls on the IVA-D900 for XM Receiver operation are
operative only when an XM Receiver is connected.
1
Press SOURCE/POWER.
The main menu is displayed.
2
Turn the Rotary encoder to select “XM,” then
press the Rotary encoder.
press the Rotary encoder.
3
Press BAND to select XM1, XM2 or XM3.
4
Press 2 (NO./NAME) to select the channel
number tuning.
number tuning.
Each time it is pressed, the tuning mode is changed.
channel number tuning
channel number tuning
↔ channel name tuning
5
Press 1 (; CH NO. DN) or 3 (CH NO. UP :) to
select the desired channel. Holding either button
down will change channels continuously.
select the desired channel. Holding either button
down will change channels continuously.
When you select the channel name tuning in step 4, press
1 (; CH NAME DN) or 3 (CH NAME UP :) to select a
channel name.
1 (; CH NAME DN) or 3 (CH NAME UP :) to select a
channel name.
When a 12-Disc CD Changer is connected;
You can select the disc numbers 1 to 6 in the same manner as
for 6-disc Changer.
You can select the disc numbers 1 to 6 in the same manner as
for 6-disc Changer.
Press 7 (PAGE 1/3) twice to select the disc numbers 7
to 12.
The Function Guide display changes and now the
Function buttons 1-6 represent disc numbers 7-12.
to 12.
The Function Guide display changes and now the
Function buttons 1-6 represent disc numbers 7-12.
• After selecting the desired setting, you can operate in the same way
as for the CD player. For details, see the CD/MP3 section
• Press BAND to switch the Disc mode in the CD/DVD/Changer
mode.
• When an MP3 compatible CD changer is connected, the unit can
play discs containing both audio data and MP3 data.
• The DVD changer (optional) is controllable from the IVA-D900 as
well as the CD changer.
Multi-Changer Selection (Optional)
Alpine's Ai-NET system will support up to 6 CD Changers. When
operating two or more changers, the KCA-400C (Multi-Changer
Switching device) must be used. If you use 1 Switching device, you
can connect up to 4 CD Changers. If you use 2 Switching devices,
you can connect up to 6 CD Changers. When using KCA-410C
(Versatile Link Terminal), you can connect two changers only.
operating two or more changers, the KCA-400C (Multi-Changer
Switching device) must be used. If you use 1 Switching device, you
can connect up to 4 CD Changers. If you use 2 Switching devices,
you can connect up to 6 CD Changers. When using KCA-410C
(Versatile Link Terminal), you can connect two changers only.
1
Press SOURCE/POWER to display the main
menu.
menu.
2
Turn the Rotary encoder to select a desired
changer.
changer.
The display shows the selected CD changer mode
screen.
screen.
• When one KCA-400C is connected to the changer, "Changer
1-4" is displayed in the main menu. When two KCA-400Cs
are connected to the changer, "Changer 1-6" is displayed in
the main menu. When one KCA-410C is connected to the
changer, "Changer 1-2" is displayed in the main menu.
are connected to the changer, "Changer 1-6" is displayed in
the main menu. When one KCA-410C is connected to the
changer, "Changer 1-2" is displayed in the main menu.
• In Changer mode, you can select the next changer (connected
changers only) by pressing BAND on the unit or on the
remote.
remote.
• You cannot operate this function in the Title display or Title
Inputting display.
3
To operate the selected changer, see "CD/MP3"
section.
section.
• To operate the selected changer, see “CD/MP3”(pages 12-
13).
7
6
5
4
3
2
1
BAND
SOURCE/POWER
Rotary encoder
LIST/INPUT