Alpine IVA-D900 User Manual

• No disc is inserted.

- Insert a disc.

• Although a disc is inserted, “NO DISC” is displayed and the

unit does not start to play or eject the disc.
- Remove the disc by following these steps:

Press c for at least 3 seconds.

• Remote control operation is not possible.

- For some discs or playing modes, certain operations are not

possible.  This is not a malfunction.

• Protective circuit is activated to high temperature.

- The indicator will disappear when the temperature

returns to within operation range.

- Leave the power OFF until the temperature decreases and

then turn the power ON again.

• PAL disc is loaded.

- Load an NTSC disc

• Mechanism error.

1) Press c and eject the disc.

If not ejecting, consult your Alpine dealer.

2) When the error indication remains after ejecting, press

c again.
If the error indication still does not turn off after pressing
c for a few times, consult your Alpine dealer.

• Scratched disc, contaminated disc/poor recording/disc

incompatible with this unit
- Press c.
- Change the disc.

(Displayed only in IVA-D900 (front
monitor))

(Displayed in the rear monitor)

(Displayed in the rear monitor)

(Displayed in the rear monitor)