Alienware D01M User Manual
100
Master I/O Board
Replacing the Master I/O Board
1 Align the screw holes on the master I/O board to the screw holes on the
chassis and place the master I/O board in the chassis.
2 Replace the screws that secure the master I/O board to the chassis.
3 Route and connect the cables that you removed from the connectors on
3 Route and connect the cables that you removed from the connectors on
the master I/O board.
NOTE:
For information on master I/O board connectors, see "Master I/O
Postrequisites
1 Replace the PCI-fan. See "Replacing the PCI-Fan" on page 54.
2 Replace the drive-bay shroud. See "Replacing the Drive-Bay Shroud" on
2 Replace the drive-bay shroud. See "Replacing the Drive-Bay Shroud" on
1
master I/O board
2
screws (4)
2
1
book.book Page 100 Wednesday, May 16, 2012 2:37 PM