Alienware D01M User Manual

Media-Card Reader

1 Slide the media-card reader into the FlexBay dock.
2 Replace the screws that secure the media-card reader to the FlexBay dock.
3 Lift the securing tab and slide the FlexBay dock through the front of the 

computer until the securing tab snaps into place.

4 Connect the FlexBay USB cable to the FLEXBAY connector on the master 

I/O board. For more information on the location of the connector, see 

5 Close the PCI shroud. See "Closing the PCI Shroud" on page 46.
6 Replace the left side-panel. See "Replacing the Left Side-Panel" on 

7 Lift the drive panel towards the top of your computer until it snaps into 

place.

1 media-card reader

2 screws (4)

3 FlexBay dock

1

2

3

book.book  Page 43  Wednesday, May 16, 2012  2:37 PM