Akura AMTDT3502 User Manual
DTR Setting
You can modify the time shift duration, format the hard disk, check the hard disk
information or set the auto discard mode here.
Time Shift Duration
Adjust the time shift duration according to the options: 30/60/90/120 minutes.
Format Hard Disk
After pressed the OK button, you need input the right PIN code to proceed the
format operation.
HDD Information
Display the hard disk information of this unit if an available hard disk attached.
Auto Discard Setting
When the HDD is full erase the exist recordings as to their type, the choices are:
"Oldest,Shortest,Biggest", select "Excluded" to remove the unviewed recordings
otherwise choose "Included".
You can modify the time shift duration, format the hard disk, check the hard disk
information or set the auto discard mode here.
Time Shift Duration
Adjust the time shift duration according to the options: 30/60/90/120 minutes.
Format Hard Disk
After pressed the OK button, you need input the right PIN code to proceed the
format operation.
HDD Information
Display the hard disk information of this unit if an available hard disk attached.
Auto Discard Setting
When the HDD is full erase the exist recordings as to their type, the choices are:
"Oldest,Shortest,Biggest", select "Excluded" to remove the unviewed recordings
otherwise choose "Included".
OSD Setting
You can modify the timeout of the OSD banner here. The options can be:5 seconds,
10 seconds,15 seconds,20 seconds, the OSD menu will turn off if timeout.
You can modify the timeout of the OSD banner here. The options can be:5 seconds,
10 seconds,15 seconds,20 seconds, the OSD menu will turn off if timeout.
Timers
Follow below steps to activate the Timer window:
1). Enter the main menu, press the "UP" or "DOWN" button to highlight the "Timer".
2). Press the "OK" button to confirm, a pop up window appears.
When a timer start time is reached, the receiver starts to record or view the desired
programme, then when the end time is reached, the record stops. Filter the timers
with the RED button and Delete with the OK button.
Follow below steps to activate the Timer window:
1). Enter the main menu, press the "UP" or "DOWN" button to highlight the "Timer".
2). Press the "OK" button to confirm, a pop up window appears.
When a timer start time is reached, the receiver starts to record or view the desired
programme, then when the end time is reached, the record stops. Filter the timers
with the RED button and Delete with the OK button.
15
15
Timer
Exit
EXIT
Delete
OK
Filter
No SERVICE NAME Start Date Start End Mode
001 Classic Hits Wee 19.11.2004 13:00 15:59
002 Fashion on Frid 19.11.2004 16:00 17:59
003 Matchmaker 19.11.2004 17:00 17:59
004 Then & Now 19.11.2004 18:00 18:59
Auto Discard Setting
Deleting Setting:
Exclude unviewed recordings
Oldest
Format Hard Disk
HDD Information
Auto Discard Setting
Time Shift 30 Min