AirLink AR570W Owner's Manual

39 

                              airlink101

 

This is the name of your wireless network. You can type 
any alphanumerical characters here, maximum 32 
characters. SSID is used to identify your own wireless 
router from others when there are other wireless routers 
in the same area. It’s recommended to change default 
SSID value to the one which is meaningful to you, like 
myhome, office_room1, etc.

 

 
Channel

                  6 

Please select a channel from the dropdown list of 
‘Channel Number’ for broadcasting. You can choose any 
channel number you want to use, and almost all wireless 
clients can locate the channel you’re using automatically 
without any problem. However, it’s still useful to 
remember the channel number you use, some wireless 
client supports manual channel number select, and this 
would help in certain scenario when there is some radio 
communication problem. 

 
Show

 

Click “Show Active Clients” button, then an “Active 
Wireless Client Table” will pop up. You can see the 
status of all active wireless clients that are connecting to 
the Router.

 

 
 
After you finish with all settings, please click “Apply” button. 
If you want to reset all settings in this page, please click “Cancel” button. 
 
After you clicked Apply, the following message will be displayed on your web browser:  
 

 

 
You can click “Continue” to back to previous setup page to continue on other setup procedures, 
or click “Apply” to reboot the router so the settings will take effect (Please wait for about 30 
seconds while router is rebooting).  
 
 

 

The AR570W Wireless 150 Router provides complete wireless LAN security functions, 
including WEP, IEEE 802.11x, WPA2/WPA-PSK and WPA with RADIUS. With these 
security functions, you can prevent your wireless LAN from illegal access. Please make 
sure your wireless clients use the same security settings.