AirLink AR570W Owner's Manual

Page of 80
58 
Parameter 
      
 
 
  Description 
 
Enable QoS
 
Check this box to enable QoS, and uncheck this box to disable 
QoS. 
 
Total Download Bandwidth 
You can set the limit of total download bandwidth in kbits. To 
disable download bandwidth limitation, input 0 here.  
 
Total Upload Bandwidth 
You can set the limit of total upload bandwidth in kbits. To 
disable upload bandwidth limitation, input 0 here. 
 
Current
 
QoS
 
Table
 
From the table, you can check each QoS rule setting. 
 
Add 
 Click “Add” button to add a new QoS rule, see section 3.3.5.1 
“Add a new QoS rule” below.  
 
Edit 
If you want to modify the content of a specific rule, please check 
its “Select” box, then click “Edit” button. Only one rule should be 
selected a time! If you didn’t select a rule before clicking “Edit” 
button, you’ll be prompted to add a new rule. 
 
Delete
 
I
f you want to delete a setting, check the ‘select’ box of the 
setting you want to delete, then click ‘Delete’ button. (You can 
select more than one setting). 
 
Delete
 
All
 
If you want to delete all settings listed here, please click ‘Delete 
All’ button. 
 
Move Up
 
You can raise the priority of the QoS rule you selected by 
clicking this button.  
 
Move Down 
You can lower the priority of the QoS rule you selected by 
clicking this button. 
 
 
3.3.5.1 Add a new QoS rule 
 
After you click “Add” button on QoS page, the following message will appear: