AirLink AR695W Owner's Manual

55 

 
Some applications require multiple connections, such as Internet gaming, video 
conferencing, Internet telephony and others. These applications cannot work when 
Network Address Translation (NAT) is enabled. If you need to run applications that 
require multiple connections, specify the port normally associated with an application in 
the “Trigger” field, then enter the public ports associated with the trigger port to open 
them for inbound traffic. The range of the Trigger port is 1 to 65535. 

 

 

 

Parameter Description 

You can select a pre-defined application from the list of Popular 
applications, and the ID you wish to fill the setting in. Click Copy 
to

 and the setting you selected will be filled into the specific ID. 

Enter an outbound port number assigned by the application. 

When the trigger packet is detected, the inbound packets to the 
specified port numbers are allowed to pass through the NAT 
firewall. Type in a range of incoming ports to be triggered. For 
instance, “5000-5300” or “9091, 9093-9100”, it depends on the 
special application’s requirement. 

 
Enable 

Check to enable this Special Application rule.