AirLink AR695W Owner's Manual
60
Port
Please input the port number here. You can define a single port
(80) or a range of ports (1000-1999). Add prefix "T" or "U" to
specify TCP or UDP protocol, for example, T80, U53,
U2000-2999. No prefix indicates both TCP and UDP are defined.
Leaving this field blank indicates all ports.
(80) or a range of ports (1000-1999). Add prefix "T" or "U" to
specify TCP or UDP protocol, for example, T80, U53,
U2000-2999. No prefix indicates both TCP and UDP are defined.
Leaving this field blank indicates all ports.
Enable
Check/uncheck Enable to enable/disable each Packet Filtering
rule.
rule.
Schedule Rule#
Enter a Schedule Rule number to activate the filtering rule only
within the desired time frame. Please refer to 3.4.7 Schedule
Rule
within the desired time frame. Please refer to 3.4.7 Schedule
Rule
for detailed setting instructions. Set 0 to let the filtering rule
always take effect.
Inbound Filter
Click Inbound Filter button to go to Inbound Packet Filter settings.
Click on Save after you finished all settings.