AirLink AR695W Owner's Manual
81
For Example:
Configuration on Static Routing
Destination Subnet Mask Gateway Hop Enabled
192.168.1.0 255.255.255.0 192.168.123.216 1 √
192.168.0.0 255.255.255.0 192.168.123.103 1 √
When Client3 wants to send an IP data gram to 192.168.0.2, it will use the above table to
determine that it has to go via 192.168.123.103 (a gateway), and if it sends packets to
192.168.1.11, it will go via 192.168.123.216
determine that it has to go via 192.168.123.103 (a gateway), and if it sends packets to
192.168.1.11, it will go via 192.168.123.216
Parameter Description
Dynamic Routing
Routing Information Protocol (RIP) will exchange information
about destinations for computing routes throughout the network.
Please select RIPv2 only if you have different subnet in your
network. Otherwise, please select RIPv1 if you need this
protocol.
about destinations for computing routes throughout the network.
Please select RIPv2 only if you have different subnet in your
network. Otherwise, please select RIPv1 if you need this
protocol.
AR695W