Aiptek POCKETCINEMA V50 User Manual

Thank you for purchasing this PocketCinema V50 from Aiptek. PocketCinema V50 is the latest 
generation of Pico Projectors with DLP technology inside. DLP offers a brighter picture which 
much higher contrast and a compact size. V50 combines this features with a media player and 
battery so that PocketCinema V50 is the best solution for mobile use. 
Before you start using the product, we recommend reading this manual step by step to obtain 
the best results with your new Pico Projector. We wish you a lot of fun. 
 
Best regards 
Your Aiptek Team 
 
 

1.  Keep the device and packaging materials out of the reach of infants and children. 
2.  Avoid subjecting the power adapter and other contacts to dripping or splashing water and 

dry your hands before you use it. Do not place objects filled with liquids such as vases, etc. 
on or near the device. 

3.  Make sure that the used power outlet is always readily available and never hidden. In case 

of emergency, use the power adapter to separate the device from the power network. 

4.  Keep your device away from all flames such as candles and do not set them up in the 

vicinity of the device. 

5.  Keep the unit at least 10 cm away from other objects. Make sure the ventilation is not 

covered by newspapers, tablecloths, curtains, etc. 

6.  For your own safety, do not use the projector during thunderstorms or lightning. 
7.  To ensure safety and the display effect, always use the power adapter supplied by the 

manufacturer. 

8.  The battery is integrated with the device. Do not dissemble and modify. The battery should 

be replaced by qualified service staff only. 

9.  To ensure normal operation of this product and avoid any damage, do not use or store this 

product under the following conditions: environment with too low/high temperature; places 
with high humidity or long-term direct sunshine; bad conditions involving strong impacts. 

10.  During the operation, this product may heat lightly, which is normal. 
11.  Wait before connecting the mains adapter if the device has been moved from a cold 

location into a warm one. Any condensation that has formed may in certain circumstances 
destroy the device. As soon as the device has reached room temperature it can be used 
without risk. 

12.  Handle the product with care. Avoid contact with sharp objects. Keep device away from 

metallic objects. 

13.  Place the projector on a flat surface. Any collision or falling to the ground is likely to 

damage the product. 

14.  Do not drop or disassemble the product otherwise the warranty voids. Opening or 

removing covers may expose you to dangerous voltage or other hazards. Refer all 
servicing to qualified service personnel. 

15.  This product supports hot plugging of memory cards. However, it is suggested to power off 

the product before plugging/unplugging your memory card to protect the memory card. 

16.  Use only the accessories supplied by the manufacturer. 
17.  Both product and user’s manual are subject to further improvement or supplement without 

further notice. 

18.  Avoid facing directly into the projector’s lens.