Manualsbrain.com
  1. Manuals
  2. Brands
  3. Adtran
  4. 619500001-19A
  5. User Manual

Adtran 619500001-19A User Manual

Download
Page of 27
 Running the Installation Wizard
Unified Communications Server
 18
Copyright © 2009 ADTRAN, Inc.
619500001-19A
Before you install the agent, the host computer must have Avaya’s TAPI driver installed. The driver must 
be configured to point to the location of the IP Office unit at the remote site where the agent is being 
installed.
To install the agent
1. Start the agent installer application.
2. At the prompt, select an installation directory.
3. At the prompt, select the password that you want UC server to use to authenticate with the agent.
4. At the prompt, select a TCP port to communicate with UC server. Make sure that the TCP port you 
select is not used by another application.
Running the Installation Wizard
Run the UC Server Installation Wizard to install the UC server software. Running the wizard also allows 
UC server to automatically detect the Microsoft Windows minimum requirements, such as service packs 
and updates.
Make sure that you run the installation from a Windows logon that has the ability to install software on the 
UC server.
Run the software by putting in the CD, or navigating to the folder that contains the software. If it does not 
run automatically, select CAAutoRun.exe.
Agent port
The port on which the computers communicate with each other.
Agent password
The same password as the main site.
Device-list refresh rate How often UC server refreshes its list of available devices (use default).
Heartbeat rate
How often IP Office polls the connection.
Extensions
The extensions to monitor, and the redirect number for each monitored 
extension.
For more information about installing and configuring Avaya’s TAPI driver, refer to the 
knowledge base at 
 for the Integrating IP Office technical note.
The password that you choose must be the same as the password value configured on 
UC server for the corresponding agent.
The port that you choose must be the same as the port value configured on UC server 
for the corresponding agent.