ADIC Webcam Version 5.0 User Manual
Installing VolServ
3-18
Post Installation Tasks
601351 Rev A
Step 2.
If these printers are not attached to the VolServ host
machine serial ports A and/or B or if they are
attached to parallel ports or a remote machine, the
system administrator must set up the
machine serial ports A and/or B or if they are
attached to parallel ports or a remote machine, the
system administrator must set up the
/etc/printcap
file to define the printers.
Step 3.
To simplify the
printcap
file modification, use the
names of the label printers as defined in the
label_printers.config
file. Otherwise,
different names used in the
printcap
file must also
be defined in the
label_printers
.
config
file.
Step 4.
Cycle VolServ to pick up the changes.
Step 5.
Cycle
vswin
(if open) to pick up the changes.
Configure Printers
on Solaris
on Solaris
Solaris only: The system administrator must use the Solaris
admintool
utility to configure the label printers.
This procedure is written for an Intermec barcode label printer
attached to a Solaris server. A similar procedure can be applied
to the installation of the Seiko shelf label printer.
attached to a Solaris server. A similar procedure can be applied
to the installation of the Seiko shelf label printer.
#
# Intermec Printer:
#
barcodelabel:\
:lp=/dev/ttyb:sd=/var/spool/lpd:\
:br#9600:ms=evenp:
# volserv -t
…
# volserv