ADIC SNC 5100 User Manual

The classification is valid only if the module is operated within the specified 
temperature and voltage limits. The system using the module must provide 
power supply protection that guarantees that the system power source will 
cease to provide power if the maximum recommended operation limit or more 
is detected on the +3.3 V/+5 V at the power source. The operating temperature 
of the module must be in the temperature range given in the recommended 
operating limits. These limits guarantee the laser safety.

The optical ports of the modules must be terminated with an optical connector 
or with a dust plug.

This section gives the electronic emission notices or statements for the United 
States and other countries.

This equipment has been tested and found to comply with the limits for a Class 
A digital device, pursuant to Part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against harmful interference when 
the equipment is operated in a commercial environment. This equipment 
generates, uses, and can radiate radio frequency energy and, if not installed and 
used in accordance with the instruction manual, may cause harmful 
interference to radio communications. Operation of this equipment in a 
residential area is likely to cause harmful interference, in which case the user 
will be required to correct the interference at his own expense.