Adcom URC-200 User Manual

In most home entertainment systems, the sound 
volume is only controlled by one device. In some 
systems, it is the TV speakers that make the sound, so 
you would use the TV device on the Automator to raise 
and lower the volume. In another system, it might be a 
surround sound receiver and speakers that control the 
sound, so you would use the Automator’s AUDIO
device to adjust the volume. Constantly switching the 
Automator to TV or AUDIO to adjust the volume is 
inconvenient in daily life.

You can use Punch Through to set the Automator’s 
volume buttons to always control the sound in your 
system. That way when the Automator is set to VCR or 
DVD, the volume up, down and mute buttons will 
work perfectly without switching back to AUDIO or 
TV. Here’s how:

Enter Setup mode by pressing and holding both 
MAIN and ENT for three seconds. The top of the 
display shows that you are in SETUP mode now.

Note: You have 30 seconds for each step, otherwise the 
Automator will time out automatically. 

Press the PAGE UP button to get to page 2 of the 
SETUP menu. Press the PUNCH button.

Press the VOL button. The display confirms by 
displaying “VOL” at the top of the screen. This sets 
up the group of three buttons (Volume Up, Volume 
Down and Mute) in one action!