Addlogix CTK-CKAL User Manual

 
Overview

: 

 
Addlogix’s CTK-CKAL Check-All Universal 
Cable Tester is equipped with two 
microprocessors that allow the tester to check 
up to 5 twisted pairs (10 pins) of shielded or 
unshielded patch cables.    The Check-All 
also comes with built-in tone generator to 
allow users to quickly trace wiring using tone 
probes. The secondary “twin” unit is designed 
to provide the same function as the main unit 
as it offers the same LED display to provide 
the same result as the main unit, and it also has its own pair of TX / RX ports to conduct 
testing on its own.     
 
 
Features

: 

 

•  Test RJ45 (8P8C) as well as RJ48 (10P10C) cables 
•  Provides pin-by-pin configuration of 1-10 pin cables 
•  Traces cable / network port with its built-in tone generator 
•  Checks datacomm / network, voice / telecomm, cross over and shielded cables for 

shorts, opens, crossed pairs, and mis-wiring 

•  Provide test results on both the main test unit and the secondary test unit 
•  Auto off with low battery indicator prevents misreads 
•  Great for home office and commercial network installations and maintenance 

 
 
Operations: 
 

1.  Testing a Cable:    Since test results are available on both the main and the 

secondary test units, plug on end of the cable into the main test unit’s TX socket and 
the other end to the secondary test unit’s RX socket.    Simply push the “On/Mode” 
button to display the test results. 

 
2.  Available Test Modes: Set the tester at different testing modes by using the 

“On/Mode” buttons. 

 

a. TX 

→ 

RX test mode: Press On/Mode once to allow test signals are sent from 

the TX port through the cable into the RX port 
 
LED will illuminate in sequence one at a time on both the main unit and